Installation

Kohler Generator Setup: What the Dealer Does and What You Do

The 7 steps of a Kohler generator setup, from booking a certified dealer to the first test run, with what the installer handles and what's left for you.

Home standby generator on a concrete pad beside a brick house with its gas line and conduit

Disclosure: This post may contain affiliate links. As an Amazon Associate, we earn from qualifying purchases. This comes at no extra cost to you. Ratings reflect our own editorial evaluation.

Table of Contents

A simple Kohler generator install can start at $2,000.

That’s Kohler’s own number for the labor. Your fuel hookup, local codes and the spot you pick can push it higher.

The good news? Most of a Kohler generator setup is the dealer’s job.

Here are the 7 steps in the order they happen, with what the crew handles and the few calls that are yours.

  • Best for: Anyone who has bought, or is about to buy, a Kohler home standby generator. Skip it if you own a portable, because hooking one up is a different job.
  • Cost: From $2,000 for a simple install, per Kohler, plus the generator itself.
  • First step: Find a certified Kohler dealer on Kohler Home Energy’s website and book a site visit.

How to Set Up a Kohler Generator Step by Step

Kohler generator setup takes 7 steps, run by a certified Kohler dealer: a site visit, size and fuel choices, permits, the base and fuel line, the install, a startup test and warranty registration. You make the main choices and handle the registration yourself.

Step 1: Book a Site Visit With a Certified Kohler Dealer

Every Kohler home setup starts with a dealer looking at your home, in person or on a video call.

Kohler’s buying page recommends a professional site survey for a more accurate quote. So don’t accept a price sight unseen.

Open main electrical panel photographed before a Kohler dealer site visit

Before the visit, check the basic install requirements your home has to meet. Then pull your last few electric bills and take photos of your main panel and gas meter or propane tank.

Step 2: Choose the Size, Fuel and Location

At the visit, you and the dealer settle 3 things: size, fuel and where the generator and transfer switch go.

Size comes from the loads you want running in an outage. So list your must-have circuits first, because how much generator you need follows from that list.

A Kohler standby generator runs on natural gas or liquid propane (LP). If you already have a gas line, start there, since propane means planning for a tank too.

Location is the choice with hard rules. Your model’s install manual sets the gaps from windows, doors and vents, and local code can add its own.

Stakes and a tape measure marking a planned generator spot near the gas meter and a window

In an HOA? Read your HOA’s generator rules before you approve the spot.

Step 3: Approve the Quote and Let the Dealer Pull Permits

Kohler says its certified installers handle local permits and coordinate the licensed electricians and pipefitters. That leaves you the paperwork: sign the quote, then wait for the permit.

Read the quote line by line. It should list the generator, transfer switch, base, fuel line, electrical work and permit as separate items.

Here’s what to ask: “Does this price include the permit fees, the gas or propane hookup and the startup visit?”

Step 4: Prepare the Base and the Fuel Line

Site prep means a level base for the generator and a fuel line big enough to feed it at full load.

The base is gravel or concrete, whichever your manual and local code call for, and what the pad needs depends on both. A pipefitter then sizes the gas line from the length of the run and the generator’s rating.

Your part is access. Clear a path for the crew and mark anything buried you know about, like sprinkler lines.

Step 5: Install the Generator and Transfer Switch

On install day, the crew sets the generator on its base and mounts the automatic transfer switch (ATS) near your main panel. Then they run the fuel and wiring.

The transfer switch is what lets the system work on its own. It senses the outage, starts the generator and moves your circuits over, then hands them back when the grid returns.

Electrician mounting an automatic transfer switch next to a home's main electrical panel

The electrician grounds both units to the National Electrical Code (NEC) and any local rules. How the switch install works is a job of its own, with steps you can follow along.

Plan to be home, with the power off for part of the day.

Step 6: Start It Up and Run a Test Outage

At startup, the installer purges air from the gas line, connects the battery, checks the oil and runs a fake outage.

Watch this step. Ask the installer to show you how to set the controller to off and to automatic, and what each light means.

Then ask which day and time the exercise run is set for. Kohler’s exercise cycle is the generator running itself on a schedule, so you’ll know when to expect the noise.

Step 7: Register the Warranty and Set Up Monitoring

The last step is yours. Use the Product Warranty Registration link in the Support menu of Kohler Home Energy’s site, with the model and serial numbers from the nameplate.

Kohler’s buying page also says authorized installation keeps your warranty valid. So keep the dealer’s invoice and permit sign-off with your registration.

Kohler Home Energy page for buying a Kohler generator online or in store

Then set up the Kohler Energy Management App from the same menu, if your model supports remote monitoring.

Can You Install a Kohler Generator Yourself?

No, you shouldn’t install a Kohler standby generator yourself: Kohler Home Energy says installing a standby generator is not a DIY project. The job ties into your home’s wiring and its gas or propane supply.

What you can do is everything around the install: the circuit list, the visit prep, clearing the area and the registration. The same split holds for most home generator installation jobs, including a Generac whole-house install.

How Much Does It Cost to Set Up a Kohler Generator?

A simple Kohler generator install starts at about $2,000, according to Kohler’s buying page. The price rises with a harder fuel hookup, local code rules and where the generator sits.

The generator is a separate purchase. Kohler sells units through stores and online, then sends you to a certified dealer for the install.

So the lever you control is placement. A spot near your gas meter and main panel, where the manual and code allow it, keeps the runs short.

For one common size, the cost of a 20kW install is broken down line by line.

Kohler, Rehlko and the Right Manual

Kohler home generators now sit under Rehlko, which ran as Kohler Energy for over 100 years. Its own listing names Kohler Home Energy as one of its brands, and Kohler’s support site now sits on a rehlko.com address.

Kohler writes a different install manual for each model family. So match the model number on your nameplate before you download one.

Those manuals are written for installers. Use yours to check gaps and fuel needs with your dealer, not to wire the unit.

Frequently Asked Questions

How close can a Kohler generator be to a house?

A Kohler generator can sit only as close to your house as its model’s installation manual and your local code allow, measured from windows, doors, vents and other openings. Your dealer checks this during the site visit, so ask them to show you the clearance for your model before you approve the spot.

Do you need a permit to install a Kohler generator?

A permanent Kohler standby generator normally needs local permits, and Kohler says its certified installers handle them for you. Ask your dealer which permits your town requires and whether the fees are already in the quote.

Can you buy a Kohler generator online and have it installed?

Yes, Kohler sells home generators through retailers such as Home Depot, Lowe’s, Costco and Amazon, then points buyers to a certified Kohler dealer for the installation. Line up the dealer before the generator arrives, so it isn’t sitting in your garage waiting on a site visit.

How do you register a Kohler generator?

You register a Kohler generator through the Product Warranty Registration link in the Support menu of Kohler Home Energy’s website. Have the model and serial numbers from the generator’s nameplate ready, plus your installation date.

Final Thoughts

Kohler generator setup is a dealer’s job, but the decisions inside it are yours: size, fuel, location and the quote.

This week, find a certified Kohler dealer and book the site visit, with your electric bills and panel photos ready.

Matthew Collins
Matthew Collins

I’m Matthew Collins from Tulsa, Oklahoma. After 15 years in property maintenance, I have little patience for generator hype or neglected servicing. Here at Generator Den, I write about sizing, installation, maintenance, model comparisons, and outage safety to help households plan backup power that suits their actual needs.

More about Matthew Collins →